For a red light device, the LEDs and the electronics that drive them are not minor foreign content. They are the product. A panel built around imported LEDs cannot carry an unqualified “Made in USA” claim, and fitting imported, already populated boards into a US housing usually cannot carry “Assembled in USA” either. What a brand can say honestly is narrower and more specific.
Origin claims show up in more places than the box: product listings, website footers, ads, spec sheets, a flag icon next to the logo, a founder video filmed in the warehouse. Under the FTC’s rules, every one of them is a claim the brand has to be able to back up.
This guide covers the FTC standard, how it applies to red light devices, what “Assembled in USA” requires, where California adds its own numbers, and which accurate statements remain available to a brand selling an imported panel. It completes our country of origin series.
“Made in USA” requires all or virtually all of the product to be US-made, including its significant parts and processing. “Assembled in USA” requires substantial final assembly in the US that is also the last substantial transformation. A red light panel with imported LED boards usually qualifies for neither. Specific, true statements about what does happen in the US are still allowed.
The claims ladder
Origin claims are not a yes or no choice between “Made in USA” and nothing. They sit on a ladder, and each rung has its own requirement.
| Claim | What it requires | Panel with imported LED boards |
|---|---|---|
| “Made in USA”, “Built in America”, “American-made” | Unqualified claim. All or virtually all made in the US: final assembly, significant processing and nearly all components of US origin. | Not supportable |
| “Assembled in USA” | Principal assembly in the US that is substantial, and the last substantial transformation in the US. | Usually not if the US step is fitting populated boards into a housing |
| “Made in USA of US and imported parts” and similar qualified claims | Clear qualification that accurately reflects the US and foreign content and processing. | Depends on how much really happens in the US |
| “Designed in California”, “Engineered in Texas” | The design or engineering genuinely happened there. It must not imply the product was made there. | Possible if true and clearly worded |
| “Final assembly and testing in Ohio” | A specific, accurate description of a US process. | Possible if true and not presented as a made-in claim |
| “Made in China” on the product | Accurate origin marking for imported goods. | Required where CBP marking rules apply |
The FTC’s Made in USA Labeling Rule (16 CFR Part 323) covers labels and mail order or online promotional material, and its definition reaches any unqualified representation, express or implied, that a product is of US origin: “made”, “manufactured”, “built”, “produced” and similar words. Advertising outside the rule is still held to the same “all or virtually all” standard under the FTC Act.
Why imported LEDs decide the answer
The FTC has never set a bright-line percentage. It asks whether all significant parts and processing are of US origin, and whether any foreign content is negligible or far enough removed from the finished product. Its own illustration: imported petroleum used to make the plastic case of a clock radio can be far enough removed; the parts that make the radio work are not.
Apply that to a red light panel. The LEDs set the wavelengths. The driver sets the output. In our LED60, the 60 dual-chip LEDs across five wavelengths and the flicker-free driver that delivers its measured 190 mW/cm² at 15 cm are the reason the device exists. The steel housing holds them. If the LEDs and driver are imported, the significant parts are foreign, and no amount of US labour on the housing changes that.
Claim rule: for a light device, ask where the light comes from. If the LEDs and the boards that drive them are imported, an unqualified US-origin claim is not available, whatever the label on the carton says.
What the FTC has done about electronics like this
The FTC’s enforcement work on origin claims includes a case that maps closely onto a red light device.
FTC enforcement sweep / electronic dartboards
The company did its final assembly in the US. Key components, including computer chips, cameras and flatscreen monitors, were made abroad. The FTC alleged its “Made in the USA” claims were deceptive. The settlement required $625,000 in consumer redress, barred misrepresenting US origin, and required the company to notify consumers.
The same sweep included a footwear brand marketing products as “Handcrafted in the USA” while using uppers and soles made abroad, and a flag seller whose products were partly or entirely imported. Two more companies received closing letters after agreeing to correct their claims.
The pattern for electronics is direct: US final assembly around imported functional components is not enough for a made-in claim. Law firm commentary on the sweep also stressed a point covered in our US final assembly guide: passing CBP’s substantial transformation test is necessary for a US-origin claim but not sufficient, and CBP does not authorize “Made in USA” claims at all.
When “Assembled in USA” is available
The FTC’s policy allows an unqualified “Assembled in USA” claim when the product has undergone its principal assembly in the US, that assembly is substantial, and the product was last substantially transformed in the US. Screwdriver assembly of imported parts does not meet it.
For red light devices, that puts the line in the same place as the CBP rulings:
| What happens in the US | “Assembled in USA” |
|---|---|
| Imported, already populated LED and driver boards mounted into a housing, wired and tested | Usually not CBP rulings on comparable electronics treat this as simple assembly |
| Controller board built in the US, LED board imported | Uncertain depends on whether the US work is the last substantial transformation |
| LED and driver boards populated in the US from imported LEDs and components, then assembled | Stronger case PCBA assembly is the step CBP treats as a substantial transformation; the imported LEDs still rule out “Made in USA” |
Even in the strongest case, “Assembled in USA” describes assembly, not origin of the whole product. It should not appear next to imagery or wording that implies more.
California has its own numbers
State law can be stricter than the FTC. California’s statute (Business and Professions Code 17533.7) permits an unqualified “Made in USA” claim only when foreign content stays under 5 percent of the product’s wholesale value, or under 10 percent when the foreign components cannot be obtained in the US.
For a red light device whose LEDs and electronics are imported, those numbers are out of reach. A brand selling nationally should treat California as the binding constraint on any unqualified claim and confirm the current text of the statute before printing packaging.
What a brand selling an imported panel can say
Plenty of true things, as long as each one is specific and none of them implies the whole product was made in the US.
- Where it was designed, if the design or engineering genuinely happened there, worded so it cannot be read as a manufacturing claim.
- What happens in the US, such as inspection, testing, configuration, warehousing, warranty service and support, described as exactly what it is.
- Who the brand is, such as a US-based company with US staff, without attaching that to the product’s origin.
- The true country of origin, stated plainly. Buyers who care about origin trust brands that are clear about it.
Watch the implied claims as closely as the written ones. The FTC treats US symbols, such as flags and map outlines, as potential origin claims depending on context. A flag next to a product photo on a listing for an imported panel can say “Made in USA” without a single word.
Origin claim audit before launch
- Product label and packaging: every origin word and symbol, including the carton and inserts.
- Online listings and your website: titles, bullet points, images, badges and footer text.
- Ads and social content: captions, video voiceovers and creator scripts.
- Spec sheets and sales decks used by distributors, who repeat what you give them.
- Substantiation file: the process map and BOM origin data behind every claim you keep.
- Change control: a rule that any move of a production step triggers a claim review.
The BOM and process evidence behind a claim is the same file described in our origin hub. For the wider claim discipline on red light marketing, see how to verify medical-grade and FDA-cleared claims and how to position a red light therapy brand.
Where RedVance stands
Our panels are made in China, and we mark them that way. We will not print “Made in USA” or “Assembled in USA” on a panel we build, and we will not supply private-label packaging that carries either claim.
What we can supply is the evidence a brand needs to make accurate claims: where every step of our production happens, what each board does, and the origin of the components we buy. If your team does real work in the US, such as design, testing or service, those claims are yours to substantiate, and our data makes the boundary between our work and yours easy to show. Our OEM/ODM programme covers private-label packaging and documentation on that basis.
The origin series
Frequently asked questions
How do I verify whether my red light device can be labelled Made in USA?
Check the FTC standard: all or virtually all of the product must be made in the US, including final assembly, significant processing and nearly all components. If the LEDs or the boards that drive them are imported, those are significant parts, and an unqualified Made in USA claim is not supportable.
How do I verify whether I can say Assembled in USA?
Confirm that the principal assembly happens in the US, that it is substantial, and that it is the last substantial transformation. Mounting imported, already populated LED and driver boards into a housing usually does not meet that. Populating the boards in the US makes the case stronger.
How do I verify whether a qualified origin claim is accurate?
Compare the wording with your process map and BOM. A qualified claim must clearly and accurately describe how much of the product and its processing are US and how much are foreign. If the qualification would surprise a buyer who saw your supply chain, rewrite it.
How do I verify whether California rules apply to my origin claim?
Check California Business and Professions Code 17533.7 if you sell to California customers. It allows an unqualified Made in USA claim only when foreign content is under 5 percent of wholesale value, or under 10 percent when the foreign parts are unavailable in the US.
How do I verify whether a flag or map on my listing counts as an origin claim?
Look at the overall impression. The FTC treats US symbols such as flags and map outlines as potential origin claims depending on context. A flag next to an imported product can imply it was made in the US even without any written claim.
How do I verify that a supplier’s origin data supports my marketing claims?
Ask the supplier for a process map showing where each step happens and the country of origin of each significant component, especially the LEDs and the boards that drive them. Keep that file with your claim substantiation and require notice before any production step moves.
Send us your packaging copy. We will flag the claims our production facts cannot support.
Share your label, listing or ad copy and tell us what happens in the US. We will mark every origin claim our production data cannot back up, supply the process and component origin data for anything we build, and help you keep the true claims that remain.
Review my origin claims →FTC Made in USA Labeling Rule: 16 CFR Part 323
FTC standard for Made in USA and Assembled in USA claims: FTC enforcement policy on US origin claims
FTC Made in USA enforcement sweep: Arnold & Porter summary
Made in USA vs Assembled in USA: BBB National Programs
California Business and Professions Code 17533.7: Faegre Drinker summary
EN