An ODM’s 510(k) can carry your brand, but only while the device you sell is the device that was cleared. Change the hardware, the firmware or the claims on the box, and whether that clearance still covers you becomes an open question. The filing also does something most brands do not plan for: it puts your supplier relationship on the public record.
Many private label red light and LED beauty products reach the US market under a clearance held by the factory that built them. For a new brand this is the fastest route: no submission of its own, no testing programme, no FDA review clock. It works when the conditions are understood. It fails quietly when a brand asks for a few changes, adds new claims, or switches supplier and assumes the clearance comes along.
This guide covers when an ODM’s clearance can cover a private label device, which changes put that in question, what to ask the ODM for, and what the arrangement reveals about you. It is part of our ODM platform verification series.
FDA rules exempt a distributor that puts its own name on a device from filing its own 510(k) when another company has already filed one for that device. The exemption fits a device sold as cleared, under your name. Once the design, components, energy source, materials or intended use change significantly, the regulation calls for a new premarket notification, and deciding whether a change crosses that line is the 510(k) holder’s burden. Get the clearance documents, a written change assessment and a supplier quality agreement before you rely on it.
When an ODM’s clearance can cover you
The basis is 21 CFR 807.85(b). It exempts a distributor who places a device into commercial distribution for the first time under its own name, and a repackager who puts its own name on a device without changing other labeling or otherwise affecting the device, where a premarket notification has already been filed by another person.
FDA’s own page on who must submit a 510(k) points the same way for relabelers. In most cases a relabeler does not need its own 510(k) if the existing labeling or condition of the device is not significantly changed, and its labeling should be consistent with the labeling submitted in the 510(k).
| What stays the same | Why it matters |
|---|---|
| The physical device | The clearance describes a specific device. Your unit needs to be that device, not a variant of it. |
| Intended use and indications | Your packaging, listing and ads should stay within what the cleared labeling says the device is for. |
| Performance and technology | LED type, wavelengths, output, driver, power source and firmware behaviour should match the cleared version. |
| The manufacturer’s identity on the label | When your name is on the label but you did not make the device, FDA labeling rules require a qualifying phrase such as “Manufactured for” or “Distributed by”. |
If any of these differ, you are no longer simply distributing someone else’s cleared device. That is where the next section starts.
Changes that put coverage in question
Under 21 CFR 807.81(a)(3), a new premarket notification is required when a device is about to be significantly changed in design, components, method of manufacture or intended use. The regulation names changes that could significantly affect safety or effectiveness, such as changes in design, material, chemical composition, energy source or manufacturing process, and major changes in intended use.
| Change a brand might ask for | Category | Coverage question |
|---|---|---|
| Your logo, colour and packaging artwork, same claims | Labeling | Usually low keep the claims consistent with the cleared labeling |
| New claims on the box or listing | Labeling, possibly intended use | High claims beyond the cleared indications can amount to a change in intended use |
| Different wavelengths, LED count or output | Technology and performance | High output is what the device does |
| New firmware modes, timers or app control | Technology, software | Assess depends on what the change affects |
| Cordless version with a built-in battery | Energy source, design | High energy source is named in the regulation |
| New skin-contact material or strap | Materials | Assess material changes have their own FDA decision path |
FDA states that the burden is on the 510(k) holder to decide whether a modification could significantly affect safety or effectiveness, and its guidance on deciding when to submit a 510(k) for a change sets out decision paths for labeling, technology, engineering, performance and material changes. That means the decision about your changed version sits with the ODM, but the commercial risk sits with you.
Coverage rule: if you asked for a change, ask for the 510(k) holder’s written assessment of that change. “It’s the same device” from a sales contact is not an assessment.
There is one more boundary to watch. FDA describes the company that develops a device’s specifications as the one that submits the 510(k), not the contract manufacturer. If your team is writing the specifications for a substantially new product, rather than choosing options on the ODM’s existing device, the question of whose submission it is may move to you. That is a question for regulatory counsel before tooling starts, not after.
What to ask the ODM for
Before your brand relies on someone else’s clearance
- The 510(k) number, so you can check the record in FDA’s database yourself.
- The indications for use and device description from the cleared file, to compare against your claims and your unit.
- Model mapping: a written statement linking your retail model number to the cleared device.
- A change assessment for every difference between your version and the cleared one, signed by the 510(k) holder.
- Registration and listing details showing the establishment that makes the device and how your brand name is listed.
- A supplier quality agreement covering complaints, adverse event reporting, recalls, change control, labeling approval and UDI.
- Change notification terms: written notice before the ODM changes components, firmware or the production site.
Then verify the clearance itself independently, using the steps in how to verify an FDA 510(k) claim. A number on a spec sheet is a starting point, not evidence.
What the filing reveals about your supply chain
FDA asks companies to list every proprietary name a device is marketed under in the US, and those names are listed at the owner or operator level. Cleared 510(k) records are public. Put those together and anyone who knows your retail model can often work back to the factory behind it, in the same way described in our platform tracing guide.
That has three practical consequences.
- Your supplier is not a secret. Competitors can find the same factory and ask for the same device. Exclusivity has to come from your contract, not from obscurity.
- The clearance belongs to the ODM. If you change supplier, the coverage does not move with your brand. Your new supplier needs its own clearance for the device you sell, or you need one.
- Your changes are the ODM’s decisions. Every version change runs through the holder’s assessment and timetable, not yours.
| Route | Speed to market | Control of changes | Supplier lock-in | Confidentiality |
|---|---|---|---|---|
| Sell under the ODM’s clearance | Fastest | The ODM decides | High | Supplier traceable |
| Your own 510(k), ODM builds | Slower submission and review | You decide, as holder | Lower if your design files and test data are yours | Your name on the file |
| Negotiated ownership or transfer of an existing clearance | Depends on the deal | You, after transfer | Lower | Depends on the deal |
The right route depends on how long you plan to sell the product, how much you plan to change it, and how exposed you are to one factory. If your own submission is on the table, our guide to planning a 510(k) predicate strategy covers the first decisions.
Responsibilities that stay with your brand
Selling under someone else’s clearance does not make every regulatory task theirs. Who does what should be written down, because several roles are easy to assume and hard to prove.
- Labeling. Your name on the label needs the qualifying phrase that shows your connection to the device, and your claims need to stay inside the cleared indications.
- UDI. FDA’s UDI rule defines the labeler as the party that causes the label to be applied. Regulatory commentary reports that FDA’s UDI help desk has treated a private label distributor whose name is on the label as the labeler. Agree in writing who assigns identifiers and submits records.
- Complaints, reports and recalls. Practitioner guidance commonly leaves these with the original manufacturer unless the agreement says otherwise, with the private labeler forwarding complaints quickly. Make sure your agreement says which.
- Importing. If your US company is the importer, check FDA’s registration requirements for initial importers, which differ from those for manufacturers.
The rest of this series
Where RedVance stands
Before we quote, we will tell you plainly whether a build of ours is covered by any FDA clearance. If it is not, nothing in our quote, spec sheet or packaging artwork will imply that it is.
What we can supply is the engineering record a regulatory plan is built on. We design and build our own boards and firmware, so we can document what changes between versions. For our LED60, that record includes measured irradiance of 190 mW/cm² at 15 cm across five wavelengths, a flicker-free driver and near-zero EMF. Whether that record supports a submission for your product is a decision for your regulatory counsel, and we will give them what they need to make it. See our OEM/ODM programme for how projects are scoped.
Frequently asked questions
How do I verify my ODM’s 510(k) covers my private label device?
Get the 510(k) number, check it in FDA’s database, and compare the cleared device description and indications with your unit and your claims. Then get a written statement from the 510(k) holder linking your model number to the cleared device, and a signed assessment of any differences.
How do I verify whether a change to my private label device needs a new 510(k)?
Ask the 510(k) holder for its written assessment against 21 CFR 807.81(a)(3) and FDA’s guidance on changes to existing devices. Changes in design, materials, energy source, manufacturing process or intended use are the ones the regulation names. FDA places the burden of that decision on the holder.
How do I verify my marketing claims stay within an ODM’s clearance?
Get the indications for use from the cleared file and compare every claim on your packaging, listing and ads against it. FDA expects a relabeler’s labeling to be consistent with the labeling submitted in the 510(k). Claims beyond the cleared indications put coverage in question.
How do I verify what my 510(k) arrangement reveals about my supplier?
Search FDA’s public 510(k) and registration and listing databases using your brand and model names. FDA asks companies to list every proprietary name a device is marketed under, so your brand may appear linked to your supplier. Assume competitors can find the same connection.
How do I verify who is responsible for UDI on a private label device?
Read FDA’s labeler definition and agree the role in writing with your ODM. Regulatory commentary reports that FDA’s UDI help desk has treated a private label distributor whose name is on the label as the labeler. Your supplier quality agreement should say who assigns identifiers and submits records.
How do I verify what happens to my clearance if I change supplier?
Check who holds the 510(k). If your ODM holds it, the clearance stays with the ODM when you leave. Your new supplier needs its own clearance for the device you sell, or you need one. Plan this before you commit to a single supplier.
Send us the 510(k) number your supplier gave you. We will help you check it against the device you are buying.
Share the number, the spec sheet and your planned changes. We will compare the public record with what you are being sold, list the questions to put to the 510(k) holder, and tell you honestly where our own build fits.
Check my clearance coverage →Distributor exemption: 21 CFR 807.85
Changes requiring premarket notification: 21 CFR 807.81
Who must submit a 510(k): FDA Premarket Notification 510(k)
Changes to existing devices: FDA guidance, Deciding When to Submit a 510(k) for a Change to an Existing Device
Proprietary name listing: FDA Registration and Listing FAQ
Private label roles and agreements: Medmarc, Private Labeling of Medical Devices in the U.S.
UDI labeler and private label distributors: FDA Law Blog
EN